Home > Addtional Products > Inner Wall Photocatalysis Additives
Inner Wall Photocatalysis Additives



Inner Wall Photocatalysis Additives



 

Product Briefs
The product has been specifically designed to be a health protective coating for residential environment. The coating is an aqueous solution containing nanocrystalline TiO2 composite, which can remove harmful gas (like formaldehyde, toluene, NOx, et.al) and depress the growth of pathological bacteria. The coating generates a transparent layer on surface of interior wall and furnishing with durable air purification and anti-bacterial effects.
 
Test reports:
 
Table 3. Formaldehyde&TVOC degradation test
Item
Degradation ratio(%)
Test basis
Formaldehyde degradation
92
GB/50325-2001
TVOC degradation
76
 
Table 4. Anti-bacterial performances (under 24hrs daylight lamp irradiation)
Counting Item
SICCAS ·Inner Wall Photocatalysis Coating
Test basis
0 h
colony forming units(CFU)
24 h
colony forming units(CFU)
24 h Anti-bacterial ratio (%)
Coliform
4.4X104
< 10
> 99.9
GB/T
21510-2008
Klebsiella pneumoniae
3.0X104
< 10
> 99.9
Candida albicans
4.6X104
< 10
> 99.9
Remark
Under 24 h daylight lamp irradiation
 
 
Product categories:
SICCAS N-4: Cover-up agent, applied by spray or brush coating process on the surface of interior coating, stone, or wood et.al. Surface drying time of the product is less than 30 min under room temperature.
SICCAS N-5: Add-in agent, 5-10 wt.% mixed in interior latex coating to supply environmental protection functions.
VCSA_43Cb0s1T/